ice cream scoops cotton candy bat grips sniper skin
mint chip ice cream scoops sniper skin bat grip
pink sprinkles ice cream scoops pink sniper skin bat grip
vanilla sprinkles sniper skin  bat grip ice cream scoops
cotton candy sprinkles ice cream bat grip sniper skin
blue cotton candy sniper skin bat grip
chocolate chip cookies sniper skin bat grip ice cream scoops
ice cream scoops chocolate sprinkles sniper skin
ice cream scoops cookie dough sniper skin
pink cotton candy light pink sniper skin bat grip
cotton candy bat grips by sniper skin

Ice Cream Scoops Bat Grips

Regular price$24.99 USD
/

- IMPORTANT -

Please confirm pattern selection below

Colors

  • Worldwide shipping
  • In stock, ready to ship
  • Inventory on the way

Sniper Skin is a custom fit grip that replaces your need to constantly rewrap your bat. Our bat grips are lightweight, and easy to install. Customize the look and feel of your grip, then install it in seconds with 212 F boiling water or a heat gun!

All orders include engineered, vibration dampening foam strips to reduce the sting and enhance your swing. Our bats grips also have extra tack for improved control.

Patented, engineered and made in Canada  

* Fits most baseball, softball, slowpitch, and fastpitch bats. Including Axe Bat.

** Bat not included

Fits most baseball, softball, slowpitch, and fastpitch bats. Including Axe Bat.

Bat Grips are 11" (290mm) long, and 1.25mm thick when installed with VDF strip, or 0.5mm thick without strips.

Fits bats up to 2” (50mm) knob diameter, and as small as 0.70” (17mm) diameter handle (some short barrel and t-ball bats may not work – check smallest diameter on handle in grip area).

Can be installed over or above the knob, and on top of existing bat grips.

Waterproof.

Locks in place.

Tack can be restored when faded with grip spray such as Rawlings 5150 or similar product, providing a grip that can last all season long.

Permitted in all divisions of NCAA college play

The installation process requires 212°F (100°C) boiling water, or a heat gun to ensure correct fit. High elevation areas must use a heat gun.

Check out our video tutorial

STEP 1: CHOOSE GRIP CUSHION SET-UP

Option 1: Install Sniper Skin over existing grip

  • skip to step 2.

Option 2: Remove existing grip and install Vibration Dampening Foam (VDF).

  • Cover the entire circumference of the handle with re-positional VDF strips.

STEP 2: POSITION ON SHAFT

  • Slide the sleeve onto the bat.
  • Rotate the logo/text as desired.
  • Leave 1/2in of skin sticking out past knob. (A helpful way to measure this is using a water bottle cap - especially for boiling water installations).

STEP 3: FORM GRIP

Use at least a 1.5L electric kettle (water must be rapidly boiling with a temperature above 100°C/212°F) or a 1500W heat gun.

Boiling Water

  • Position the bat handle-side down in a sink.
  • With your non-pouring hand positioned on the barrel, keep the bat standing straight up and resting on the water bottle cap.
  • As soon as the water has boiled, pour water into the sleeve and watch the Sniper Skin shrink!
  • Continue pouring water until the kettle/pot is empty.
  • Cool off with cold water

Heat Gun

  • Stand the bat upright and begin rotating the bat
  • Hold the gun 6in from the Sniper Skin
  • Starting at the bottom of the grip, apply heat until the entire base has shrunk tightly to the shaft.
  • Continue rotating the grip and slowly move the heat up towards the unshrunk region until the grip has completely shrunk to the bat.
  • Becareful not to overheat/melt the grip

STEP 4: TRIM OFF EXCESS MATERIAL

  • Using Sharp Scissors, trim off the excess material.
  • Reheat trimmed areas and press against a hard surface to create a smooth finish.

CAUTION: USE AT YOUR OWN RISK

Shipping times and prices vary based on the delivery address, and the service chosen. Delivery options include UPS, DHL, USPS, Canada Post, and ICS. All ship options available at checkout.

Tracking information is sent to email entered during checkout. Please check spam and junk folders.

For more details, visit our shipping page

Customer Reviews

Based on 10 reviews
50%
(5)
0%
(0)
30%
(3)
0%
(0)
20%
(2)
D
Dan

The stickiness wore off after 3 months.

Great news, because these grips can last a long time, you just need to add a bat grip spray whenever needed to apply additional tack to your preference. Everyone has different preferences especially if they wear batting gloves or not. So many customers love that the grip doesn't unravel or wear out quickly, and they can wash it and add tack to get the whole season out of it sometimes. To clean this grip, use mild soap (no alcohol) and use a non lint cloth to squeeze along the grip – no rubbing. Add your favourite bat grip spray like Rawlings 5150 to your preference. Thanks.

S
S.B.

Somewhat difficult to get fit snug on the bat. Took boiling water & a heavy duty heat gun… for quite awhile, not overly impressed

Hi there, thanks for your order and reaching out.
This grip just needs more heat. Can you please use 212F boiling water – at least 1.5 L (confirmed with a kitchen thermometer as sometimes people use a pot of water that looks boiling, but it isn’t 212 F yet which is what is required to shrink properly)
(pouring from the top of the grip towards the knob as shown in the install video)

Or
If you have access to a heat gun, this will finish up super quick as well. If you are in a high altitude state where water boils before 212F, a heat gun is recommended.
Please give that a try and you will find it much more successful
Thanks

k
kristen

It was harder to put on than expected. Had to throw it out.

So sorry you cut it off before contacting us as we normally can trouble shoot with you to fix the install. The majority of the time it is easily corrected by using the boiling water at 212F and standing the grip up in the sink with the knob down as per the install video and instruction in your package. Or, a heat gun can also easily complete the install. These grips last much longer than other bat wraps, are fully customizable and because they are water proof, can be cleaned and re-tacked as needed throughout the season. Please contact customer service to review your order.

G
G.G.

Absolutely love it !! So easy to put on and I’ll definitely be ordering more !

S
Shawn

Have not received this item

***12.15.23 UPDATE - Hi, the track information provided via email, indicates this item has delivered. We appreciate your business. Thank you . ***
Hi there - thanks for your order. We can provide your shipping information through customer service. This Black Friday order has shipped via the standard mail service chosen on the order. Due to increased volume at this time of year, standard mail can take a bit longer to arrive. We will send you an email with details. Please feel free to reach out to customer service for additional information on your package.