Custom Lacrosse Grip

Unleash Your Creativity with Limitless Possibilities! By clicking the "Customize" button below, you will be directed to our state-of-the-art DESIGN YOUR OWN grip editor. Experience a blank canvas where your imagination can thrive. Select from a vast range of background colors, apply custom text, or even upload your own images. Once your design is complete, simply click "Order Now" to review your creation and proceed to checkout. Prepare to be thrilled by your unique custom grip!

Rest assured that our expert team will meticulously review your design before manufacturing. We are committed to ensuring that your design looks impeccable when installed. Should we encounter any concerns regarding your design, we will promptly contact you and collaborate to achieve perfection.

We value the creative process and encourage you to take your time. Feel free to save your work and return to it later. By entering your email before closing the page, you can conveniently retrieve your previous projects on your next visit.

If you have any inquiries or require assistance with the design process, please do not hesitate to contact our dedicated team. We are here to guide you every step of the way.

Sniper Skin is a heat shrinkable grip that replaces your need for tape. Our lacrosse grips are lightweight, and easy to install. Customize the look and feel of your grip profile, then install it in seconds with boiling water or a heat gun!

Our lacrosse grips have extra tack for improved control and all weather durability.

Patented, engineered and made in Canada 

Fits most lacrosse sticks (max outer diameter is 1.5" - 38mm).

Lacrosse Grips are 11" (290mm) long, and 1/64" (1mm) thick when installed.

Package includes 1 rubber top ring and 1/8" (3mm) thick foam tape for customizing grip profiles.

Can be installed over or above the knob, and on top of existing grips.

Waterproof.

Locks in place.

Tack can be restored when faded with grip spray such as Rawlings 5150 or similar products.

Installation Instructions

The installation process requires 212°F (100°C) boiling water, or a heat gun to ensure correct fit. High elevation areas must use a heat gun.

Watch Pro NLL player, Kiel Matisz, install a Sniper Skin grip

STEP 1: CUSTOMIZE GRIP PROFILE

Create your own grip preference with the top ring and foam tape included in the package, or install Sniper Skin right over your existing grip.

Wrap foam tape around the shaft up to 9" (23cm) from the end.

STEP 2: POSITION ON SHAFT

• Slide the sleeve onto the stick.
• Rotate the logo/text as desired.
• Leave 1/2in of skin sticking out past the endo. (A helpful way to measure this is using a water bottle cap - especially for boiling water installations).

STEP 3: FORM GRIP

Use at least a 1.5L electric kettle (water must be rapidly boiling with a temperature above 100°C/212°F) or a 1500W heat gun.

Boiling Water

• Position the stick handle-side down in a sink.
• With your non-pouring hand positioned on the basket, keep the stick standing straight up and resting on the water bottle cap.
• As soon as the water has boiled, pour water into the sleeve and watch the Sniper Skin shrink!
• Continue pouring water until the kettle/pot is empty.
• Cool off with cold water.

Heat Gun

• Stand the stick upright and begin rotating the stick.
• Hold the gun 6" from the Sniper Skin.
• Starting at the bottom of the grip, apply heat until the entire base has shrunk tightly to the shaft.
• Continue rotating the grip and slowly move the heat up towards the unshrunk region until the grip has completely shrunk to the stick.
• Becareful not to overheat/melt the grip

STEP 4: TRIM OFF EXCESS MATERIAL

• Using Sharp Scissors, trim off the excess material.
• Reheat trimmed areas and press against a hard surface to create a smooth finish.

CAUTION: USE AT YOUR OWN RISK